AutoScan-DS-MIX
More Than Details
- 2×5.0 MP cameras
- Accuracy ≤7μm
- Intelligent scan
- High-end implant and veneer applications
Technical Specifications
| Model | AutoScan-DS-MIX |
|---|---|
| Camera Resolution | 2×5.0MP |
| Accuracy | ≤7μm (ISO12836) |
| Scan Time | 6s for bite scan; 13s for upper/lower jaw scan; 18s for 1-4 dies scan; 33s for 5-8 dies scan; 32s for impression scan* |
| Articulator Scan | Dynamic/static;support articulator transfer |
| Output Format | STL, PLY |
| Light Source | Blue Light |
| Dimension | 238(L)x340(W)x447(H)mm |
| Weight | 7.5kg |
| Interface | USB3.0 |
| Power Supply | DC24V |
AutoScan-DS-MIX Dental 3D Scanner – SHINING 3D Digital Dental Solutions
AutoScan-DS-MIX is a high-end dental 3D scanner developed by SHINING 3D. With open design and modular structure,AutoScan-DS-MIX features fine details, high accuracy and high efficiency to fulfill users’ demands of a wide range of dental applications including crown&bridge, implant, bar, etc.
Ultra-fine Details
Thanks to dual 5.0 MP high resolution cameras, AutoScan-DS-MIX can perfectly capture edge lines of abutments and features of scan bodies.
2*1.3MP vs. 2*5.0MP
High Accuracy
Scan accuracy ≤7μm assures reliable scan result.
High Efficiency
AutoScan-DS-MIX supports high efficiency scan mode: 13 seconds for scanning a full arch.
With All-in-one scan it can improve scan efficiency by approx. 30%.
All-in-one Scan
Non-separated full jaws scan improves scan process efficiency by approx. 30%
Intelligent Add-Scan
With the scan software supporting automatic detection of unscanned surfaces and automatic add-scan, AutoScan-DS-MIX offers intuitive user experience.
Screw Channel Sealing
Users can seal the screw channel in the scan software, which optimizes the scan workflow.
Flexible Articulator Scan
AutoScan-DS-MIX supports not only dynamic and static two scan modes for most common articulators, but also supports articulator transfer for Artex, Kavo, SAM and Bio-Art articulators.
Versatile Applications
With exceptional scan performance, AutoScan-DS-MIX supports versatile dental scan applications, inlc. abutment, scan body, articulator, all-in-one, impression, texture, etc.
*The scan speed of impression is under high speed scan mode.
**Notice: SHINING 3D reserves the right to explain any alteration of the specifications and pictures.