AutoScan-DS-MIX is a high-end dental 3D scanner developed by SHINING 3D. With an open design and modular structure, AutoScan-DS-MIX features fine details, high accuracy, and high efficiency to fulfill users’ demands of a wide range of dental applications including crown & bridge, implant, bar, etc.
More Than Details
- 2×5.0 MP cameras
- Accuracy ≤7μm
- Intelligent scan
- High-end implant and veneer applications
Thanks to dual 5.0 MP high resolution cameras, AutoScan-DS-MIX can perfectly capture edge lines of abutments and features of scan bodies. 2*1.3MP vs. 2*5.0MP
Scan accuracy ≤7μm assures reliable scan result.
AutoScan-DS-MIX supports high-efficiency scan mode: 13 seconds for scanning a full arch. With an All-in-one scan, it can improve scan efficiency by approx. 30%.
Flexible Articulator Scan
AutoScan-DS-MIX supports not only dynamic and static two scan modes for most common articulators, but also supports articulator transfer for Artex, Kavo, SAM and Bio-Art articulators.
With exceptional scan performance, AutoScan-DS-MIX supports versatile dental scan applications, inlc. abutment, scan body, articulator, all-in-one, impression, texture, etc.
Non-separated full jaws scan improves scan process efficiency by approx 30%.
With the scan software supporting automatic detection of unscanned surfaces and automatic add-scan, AutoScan-DS-MIX offers intuitive user experience.
Screw Channel Sealing
Users can seal the screw channel in the scan software, which optimizes the scan workflow.
|Articulator Scan||Dynamic/static; support articulator transfer|
|Output Format||STL, PLY|
|Light Source||Blue Light|
|Scan Time||bite scan: 6 seconds|
upper/lower jaw scan: 13 seconds
1-4 dies scan: 18 seconds
5-8 dies scan: 33 seconds
impression scan: 32 seconds