September 22, 2021

Gold: $1,773.40

Palladium:$1,985.00

Platinum: $988.00

Silver: $22.93

September 22, 2021

Gold: $1,773.40

Palladium:$1,985.00

Platinum: $988.00

Silver: $22.93

Phone: (800) 422-7373

Nabertherm Furnaces

LHT 01/17 D

LHT 03/17 D

LHT 01/17 LB Speed

LHT 02/17 LB Speed

High quality and an excellent price/performance ratio characterize the Nabertherm product range of furnaces and accessories for dental applications. Starting with burn-out furnaces for embedding and casting over a wide range of sintering furnaces for zirconia, translucent zirconia, and alloys of CoCr as well as furnaces for annealing after laser sintering – the wide product range from Nabertherm certainly offers the perfect solution for your heat-treatment process. Short delivery times – most furnaces are available from stock – round up our service portfolio.

Features
MODEL LHT 01/17 D LHT 03/17 D LHT 01/17 LB Speed LHT 02/17 LB Speed
LOADING FRONT FRONT BOTTOM BOTTOM
TMAX 1650° C 1650° C 1650° C 1650° C
SAGGAR TRAY SQUARE ROUND SQUARE ROUND
STACK 2 3 2 3
CROWNS/TRAY 15 25 15 25
VOLTS 208V, 220V 208V, 220V 208V, 220V 208V, 220V
PROGRAMS 50 50 50 50
WARRANTY 1 YEAR 1 YEAR 1 YEAR 1 YEAR

DROPSHIP COST:
Westcoast: $360.00      Eastcoast/South: $210.00

DENTAL LHT D

Zirconia Sintering Furnaces for Sintering Translucent Zirconia

LHT 01/17 D

LHT 03/17 D

Product Advantages High-Temperature Furnaces

  • Furnace chamber with a volume of 1 or 4 liters
  • Tmax 1650°C
  • Appealing, double-walled stainless steel housing
  • Additional fan cooling for low surface temperature
  • Only insulation materials that are not classified as carcinogenic according to TRGS 905, Class 1 or 2 are used
  • Molybdenum disilicide heating elements with best possible protection against chemical interaction between charge and heating elements
  • Usable for sintering blanks of all leading manufacturers
  • Controller P480 with memory for 50 programs
  • Type S thermocouple
  • Scope of delivery includes a starter set for charging on one level
  • Up to two (LHT 01/17D) or three (LHT 03/17 D), saggars can be placed
  • Up to 15 resp. 25 single crowns can be placed in each saggar
  • Controller can be freely programmed for all recommend sintering cycles of leading manufacturers
  • Important data about power consumption and operating hours available via the information menu of the controller

Process Control and Documentation

Displays and Functions

Entering a New Program

Loading Saved Programs

Entering the Start Time (day and time)

Saving a Program Under the Program Name

NTEdit Software

  • Entering Programs on the PC
  • MS-Excel
  • Freeware
  • Entered on the PC
  • Imported into the controller with USB stick

DENTAL LHT Speed

High-Temperature Bottom Loading Furnaces for Sintering Translucent Zirconia

LHT 01/17 LB Speed

LHT 02/17 LB Speed

Product Advantages High-Temperature Bottom Loading Furnaces

  • Furnace chamber with a volume of 1 or 2 liters, table with large floor space
  • Tmax 1650°C
  • Appealing, double-walled stainless steel housing
  • Only insulation materials that are not classified as carcinogenic according to TRGS 905, Class 1 or 2 are used
  • Molybdenum disilicide heating elements with best possible protection against chemical interaction between charge and heating elements
  • Usable for sintering blanks of all leading manufacturers
  • Precise, motorized toothed belt drive of the table
  • Drying function: When starting the program the table will be driven in drying position and closes automatically at 500 °C
  • Forced cooling function with an automatic, step-by-step opening from a preset temperature
  • Controller P480 with memory for 50 programs, 2 sample programs
  • Type S thermocouple
  • Scope of delivery includes one starter set for charging on one level
  • Up to two (LHT 01/17LB Speed ) or three (LHT 02/17 LB Speed), saggars can be placed
  • Up to 15 resp. 25 single crowns can be placed in each saggar
  • Controller can be programmed for all recommend sintering cycles of leading manufacturers
  • Important data about power consumption and operating hours available via the information menu of the controller

Process Control and Documentation

Displays and Functions

Entering a New Program

Loading Saved Programs

Entering the Start Time (day and time)

Saving a Program Under the Program Name

NTEdit Software

  • Entering Programs on the PC
  • MS-Excel
  • Freeware
  • Entered on the PC
  • Imported into the controller with a USB stick

Contact Information

Contact Us
P.O. Box 7200
Fullerton, CA 92834-7200
Toll Free: (800) 422-7373
Local: (714) 523-5544
Fax: (714) 870-0608
Monday – Friday
7 a.m. – 5:00 p.m. PST